The technical parameters of screw sludge dewatering are important criteria for evaluating its performance and selecting suitable equipment, including but not limited to the following:

Processing capacity: The processing capacity of equipment is usually expressed in terms of the dry solid mass (DS) that can be processed per unit time, such as the absolute dry mass DS 390-480 Kg/h.

Solid content of incoming mud: Refers to the solid content of the mud entering the equipment, usually with a minimum solid content requirement, such as ≥ 1%.

Mud inflow: refers to the volume of mud that the equipment can process per hour, such as 40m ³/h.

Moisture content of mud cake: The percentage of moisture content in the processed mud cake is usually between 75-85%.

Spiral shaft speed: affects dehydration efficiency, usually through variable frequency speed regulation.

Power: The electrical energy required for the operation of the equipment, such as 5.7kw.

Flushing water consumption: The amount of flushing water required during the operation of the equipment, such as 100L/h of clean water consumption.

Material: including 304 stainless steel, carbon steel, etc., which affects the corrosion resistance and wear resistance of the equipment.

Size and weight: The external dimensions and weight of the equipment are crucial for its installation and handling.

Flocculation tank parameters: including size, capacity, material, etc., these parameters affect the flocculation effect.

Motor parameters: including brand, model, power, etc. The quality and performance of the motor are crucial for the stable operation of the equipment.

PLC control cabinet: The brand and function of the control cabinet affect the automation level and operational convenience of the equipment.

The technical parameters of different models and specifications of screw sludge dewatering may vary, so the appropriate equipment needs to be determined based on specific sludge treatment requirements and conditions when selecting. At the same time, the manufacturer's production qualifications, technical strength, and after-sales service are also important factors to consider when choosing screw sludge dewatering.

PRE : Advantages of Multi disk Screw Press Technology

NEX : Which is a good manufacturer of screw sludge dewatering?